Mold Types & Removal Cost In Toronto

Which are the Most common types of mold found in homes? Mold growth is a hazard. Thats why mold removal in toronto is required at large scale.


Commonly referred to as “black mold” for its greenish-black color, Stachybotrys is a toxic mold that thrives in humid conditions and is most commonly found on cellulose-like materials, such as wood, drywall or even piles of leaves. wet. It starts with small black spots that get bigger and spread. Stachybotrys is a dangerous mold that can cause a host of physical symptoms, including severe headaches, unexplained nosebleeds, upper respiratory discomfort, and fatigue. It could also cause bleeding in the lungs of infants. If a family member is showing symptoms and you are concerned your home may be infested with black mold, callour mold decontamination experts who can test for mold and determine the best way to get rid of it. On the plus side, many types of mold are black, but most are not actually Stachybotrys.


Aspergillus is common in many homes and is likely to grow on any wet surface, but is difficult to identify as there are over 180 strains of Aspergillus and many are different colors. Most strains of this allergenic mold are harmless, but a few can cause serious illness or lead to a fungal infection known as aspergillosis in people with weak immune systems.

Aureobasidium pullulans

This type of allergenic mold often appears under wallpaper when it is removed from walls; it can also grow on bare wood and painted surfaces. Aureobasidium may irritate the skin on contact. When it begins to grow it is light pink or gray, but as it matures it turns deep brownish-black.


Acremonium is nearly 100 strains of toxigenic molds that can be found in the pipes and drains of air conditioners and humidifiers. Mold can be difficult to diagnose without testing because it appears in several different colors, including white, pink, or gray. As mold grows, it begins to appear dry and powdery.


This allergenic and pathogenic mold is more likely to grow after water damage or flooding. Because they thrive in both humidity and darkness, Chaetomium spores often begin to grow in the interior spaces of partitions and may not be visible until the mold has spread to outside the wall. By this time, the fungus has often invaded large areas inside the wall.


Some types of mold need heat to survive, but Fusarium thrives and spreads even in temperatures near zero. Fusarium strains can appear almost anywhere. Most strains are allergenic and only cause hay fever-like symptoms, but a few strains can be highly toxic, causing nervous system disorders and internal bleeding. Fusarium is a common risk to garden plants and agricultural crops, and many tomato plants today have been hybridized to reduce Fusarium wilt.


Penicillin is a valuable antibiotic, but a strain of Penicillium mold is both allergenic and pathogenic. It produces spores that can trigger allergy-like symptoms such as sinusitis, difficulty breathing, and episodes of asthma. In people with immune system disorders, symptoms can be more severe and lead to chronic health problems.


Small raised spots of white and olive-green mold growing in damp areas, such as near a leaky window or around a shower, can indicate Trichoderma mold. This type of allergenic mold grows quickly in damp places. Trichoderma in a home can cause coughing, sneezing, and bronchial infections.

Difference between mold and mildew

Mold and mildew have two common types of fungus found in humid environments. Both types of organism spread easily and are difficult to eliminate.

Similarities between mold and mildew

  • Mold and mildew are two types of filamentous fungi.
  • Mold and mildew thrive on moist organic material.
  • Mold and mildew spread easily and are difficult to remove.
  • Both mold and mildew cause health problems as well as structural damage to the materials they grow.
  • Keeping areas free of moisture can prevent the growth of mold and mildew.

Difference between mold and mildew

Mold: Mold is a fungus that appears on food or other organic material in humid and warm conditions.


Mold: Mold thrives on food or permanent materials such as walls.


Mold: The mold penetrates the surface of the attached material


Mold: Mold can be fuzzy or gooey.

Patch color

Mold: The mold spot can be white, blue, green, black, brown or gray.


Mold: Organic matter covered by mold breaks down over time.

Common types

Mold: Alternaria, Aspergillus, Cladosporium, Penicillium, and Stachybotrys chartarum (black mold) are common types of molds.

Health problems

Mold: Prolonged exposure to mold can cause allergic reactions, breathing problems, inflammation, migraines, extreme fatigue, and joint pain.

Effect of bleaching

Mold: The color of the mold remains as it is after bleaching.


Mold: Molds are used in making cheese and in the manufacture of certain drugs such as penicillin.

Q: Is It Safe to Sleep in a House with Mold in Toronto?

In addition, when you have the humidity at home, it only takes 24 hours for the mold to develop and 48 hours for its spores to be flying through the air. Therefore, sleeping in a room that exceeds 65% of the ambient humidity has high and various harmful effects on health.

Q: How Much Does Professional Mold Removal Cost in toronto?

A decontamination and remediation specialist will be able to solve your mold problem, whatever its magnitude. But before you start the decontamination work, it is necessary to undergo a thorough mold inspection of your home and which is summarized in a detailed examination of the surfaces that can be contaminated.

Other Interesting Articles You must read:

10 Things You Should Consider Before Hiring A Mold Removal Company

🔥I do {Growth = Marketing🎯+Data💻+UX👁‍}while{ !ADHD😵 && location == ‘LPA — Long Beach & company = #growthhacker

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store